Home
Products
Direct Fastening
Special Applications

Special Applications

Find out how custom-built direct fastening solutions can streamline specialized applications – like marking on cold and hot steel or testing sprayed concrete

Overview
More details

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

DX 462 HM

Fully automatic, high-productivity, powder-actuated tool for marking on cold and hot metal surfaces

Dimensions (LxWxH): 21.5 x 2.2 x 6.5 in
Weight: 9.6 lb.
Cartridge type: .27 caliber short, 6.8/11 M10

$4,639.00

Compare (1)

X-462

Marking head for the DX 462 powder-actuated tool used for marking on cold and hot metal surfaces

Base materials: Steel
Marking head capacity: 10 characters (5.6 mm wide), 7 characters (8.0 mm wide)

From $1,646.91

Compare (1)

X-MC S 5.6/10

Sharp-tipped, narrow letter and number characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Sharp

From $84.75

Compare (1)

X-MC S 8/10

Sharp-tipped, wide letter and number characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Sharp

From $41.25

Compare (1)

X-MC LS 5.6/6

Round-tipped, narrow letter and number characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Low stress

From $75.50

Compare (1)

X-MC LS 8/10

Round-tipped, wide letter and number characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Low stress

From $84.75

Compare (1)

X-MC 5.6

Sharp-tipped, narrow special characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Sharp

From $21.95

Compare (1)

X-MC 8

Sharp-tipped, wide special characters for stamping identification markings onto metal

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Sharp

From $21.95

Compare (1)

7x2

Sharp-tipped, mini letter and number characters for stamping identification markings onto metal with space constraints

Application: Marking cold steel, Marking hot steel
For use with (tools): DX 462 CM, DX 462 HM
Character type: Sharp

From $37.75

Compare (1)

6.8/11 M10

Collated Clean-Tec cartridges for use with powder actuated nailers

Cartridge type: 6.8/11 M10
Cartridge strip capacity: 10
Clean-Tec: Yes

From $26.75

Compare (1)

6.8/11 M10

Collated cartridges for use with powder actuated nailers

For use with (tools): DX 2, DX 351, DX 36, DX 450, DX 460, DX 462, DX 5 F8, DX 5 MX, DX A40, DX A41
Cartridge type: .27 caliber short
Approvals: CE, CIP, PTB

From $23.95

Compare (1)

X-EDS

Single nails for fastening metal elements to steel structures with powder-actuated nailers

Base materials: Steel
Minimum thickness of base material (steel): 1/4 in
Environmental Conditions: Dry indoor

From $107.95

Compare (1)

X-M6 D12

Carbon steel threaded stud for use with powder-actuated nailers on concrete or for sprayed concrete testing

Base materials: Concrete (soft)
Washer size: 1/2 in
Thread diameter: 6 mm

From $107.00

Compare (1)

X-SW 30

Soft washer for attaching waterproofing membrane to concrete or masonry

Application: Membranes and drainage plates, Nets, fabric and similar, Plastic corrugated sheets
Corrosion protection: Galvanized zinc coated <20 µm
Environmental Conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Special applications

From $60.75

Compare (1)

X-SW 60

Soft washer for attaching waterproofing membrane to concrete or masonry

Application: Membranes and drainage plates, Nets, fabric and similar, Plastic corrugated sheets
Corrosion protection: Galvanized zinc coated <20 µm
Environmental Conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Special applications

From $107.00

Compare (1)

X-BC-C P8

Basket clip with preassembled nail for fastening rebar baskets to road beds

Material: Carbon steel
Corrosion protection: Galvanized zinc coated <20 µm
Environmental Conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Special applications

From $547.00

Compare (1)

Back to products ()

Compare

Products ()

Added to cart

Go to shopping cart

Update of quantity

Please note, the order volume has been updated. This is due to package and minimum order quantities.

Please note, the order volume has been updated to . This is due to package and minimum order quantities.

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti Canada
Service Hotline: (800) 363-4458