Accessories for direct fastening
Find nail magazines, lubricants, washer holders, setting tools and other accessories for direct fastening tools
186 Products
Filter
- Description
- Pistons for the DX 462 powder actuated tools
- For use with (tools)
- DX 462 CM, DX 462 HM
- Additional Accessory Information
- Piston for DX462
- Description
- Accessories for DX 76 and DX 860 powder-actuated nailers
- For use with (tools)
- DX 76, DX 76 MX, DX 860 ENP
- Additional Accessory Information
- X-76-P-ENP piston for DX 76 or DX 860-ENP (European version) for ENP decking fasteners
- Description
- Accessories for DX 76 and DX 860 powder-actuated nailers
- For use with (tools)
- DX 76
- Description
- Accessories for DX 76 and DX 860 powder-actuated nailers
- For use with (tools)
- DX 76
- Additional Accessory Information
- X-76-P-HVB piston for DX 76 for HVB shear connectors
- Description
- Accessories for DX 76 and DX 860 powder-actuated nailers
- For use with (tools)
- DX 76, DX 860
- Additional Accessory Information
- X-76-PS piston stopper for X-860-P-ENP piston, X-76-P-ENP piston and X-76-P-HVB piston
- Description
- Piston and stop ring for the DX E72 powder actuated tool
- For use with (tools)
- DX E72
- Description
- Piston and stop ring for the DX E72 powder actuated tool
- For use with (tools)
- DX E72
- Description
- Pole tool for use with the GX 120 gas nailer
- For use with (tools)
- GX 120, GX 120-ME
- Pole tool length
- 23.03 in
- Description
- Pole tool for use with the BX 3 cordless nailer
- For use with (tools)
- BX 3-IF, BX 3-ME-A22
- Description
- Pole tool for use with the BX 3 cordless nailer
- For use with (tools)
- BX 3-IF, BX 3-ME-A22
- Description
- Pole tool for use with the GX 3 gas nailer
- For use with (tools)
- GX 3-ME
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 2
- Pole tool length
- 23.23 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 5 F10, DX 5 F8, DX 5 MX
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 5 F10, DX 5 F8, DX 5 MX
- Pole tool length
- 85.04 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 CT
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 CT
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 CT
- Description
- Pole tools and other accessories for powder actuated tools
No technical data available
- Description
- Pole tools and other accessories for powder actuated tools
No technical data available
- Description
- Pole tools and other accessories for powder actuated tools
- Pole tool length
- 85.04 in
- Description
- Pole tools and other accessories for powder actuated tools
- Pole tool length
- 59.06 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- All DX tools
- Pole tool length
- 36.61 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- All DX tools
- Pole tool length
- 13.78 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- All DX tools
- Pole tool length
- 19.29 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 35
- Pole tool length
- 83.86 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 F8, DX 351 M/E
- Pole tool length
- 83.86 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 F8, DX 351 M/E
- Pole tool length
- 23.23 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 F8, DX 351 M/E
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 2
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 460, DX 5
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 460 F10, DX 460 F8, DX 460 MX
- Pole tool length
- 83.86 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 460 F10, DX 460 F8, DX 460 MX
- Pole tool length
- 23.23 in
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 351 CT
- Description
- Pole tools and other accessories for powder actuated tools
- For use with (tools)
- DX 460 F10, DX 460 F8, DX 460 MX
- Pole tool length
- 19.29 in
- Description
- 16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)
No technical data available
- Description
- Magnetic ground clamp (X-MC F3) and ground cable (X-GC F3) help close the electrical circuit during stud fusion
No technical data available
- Description
- Magnetic ground clamp (X-MC F3) and ground cable (X-GC F3) help close the electrical circuit during stud fusion
No technical data available
- Description
- Stud holder for accurately installing S-BT threaded screw-in studs
- Length
- 2.8 in
- Description
- Stud holder for accurately installing S-BT threaded screw-in studs
- Length
- 2.8 in
- Description
- Inspection card S-IC BT for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Washer setting tool accessory for sealing washers during stud fusion
No technical data available
- Description
- The FX 3-HT-SR shielding ring provides the correct distance between the stud and base material, and isolates the welding area from the external environment
No technical data available
- Description
- Stud holder change tool to exchange stud holders during stud fusion
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth
No technical data available
- Description
- 5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)
No technical data available
- Description
- Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials
- Steel, Aluminium
- Description
- Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials
- Steel, Aluminium
- Description
- Adjustable depth gauge for accurately installing S-BT threaded screw-in studs
- Base materials
- Steel, Aluminium
- Description
- Collated .27 caliber cartridges for use with stand-up powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 860-HSN, DX 9-HSN
- Cartridge type
- .27 caliber short, 6.8/11 M40
- Approvals
- CE, CIP, PTB
- Description
- Propellant cartridges for use with the DX E72 powder actuated tool
- For use with (tools)
- DX E37, DX E72
- Cartridge type
- 5.5/16 NC
- Approvals
- CE, CIP, PTB
- Description
- Collated .25 caliber cartridges for use with powder actuated nailers
- For use with (tools)
- DX 35
- Cartridge type
- .25 caliber short
- Approvals
- CIP, PTB
- Description
- Collated cartridges for use with powder actuated nailers
- For use with (tools)
- DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41
- Cartridge type
- .27 caliber short
- Approvals
- CE, CIP, PTB
- Description
- Single .27 caliber long cartridges for use with powder-actuated nailers
- For use with (tools)
- DX 600N
- Cartridge type
- .27 caliber long single
- Approvals
- CIP
- Description
- Collated .27 caliber long Clean-Tec cartridges for use with powder-actuated nailers for fastening metal decks
- For use with (tools)
- DX 750, DX 76, DX 76 PTR
- Cartridge type
- .27 caliber long, 6.8/18 M10
- Approvals
- CE, CIP, PTB
- Description
- Sharp-tipped, mini letter and number characters for stamping identification markings onto metal with space constraints
- Application
- Marking cold steel, Marking hot steel
- For use with (tools)
- DX 462 CM, DX 462 HM
- Character type
- Sharp