Heavy-duty channel system (MI)

Hilti's strongest heavy-duty channel system saving time and increasing productivity in various applications

Overview
More details

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

MI

Hot-dip galvanized (HDG) installation girders with greater adjustability for heavy-duty applications

Material composition: DD11 MOD - HN 555, S235JR - EN 10025
Surface finish: Hot-dip galvanized, 75 µm - ASTM A123

From $535.00

Compare (1)

MIC-C90-DH New

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025;Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $315.00

Compare (1)

MIC-C120-DH New

Hot-dip galvanized (HDG) bracket to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $480.00

Compare (1)

MIC-S90H New

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36
Surface finish: HDG: min 75 µm - ASTM A123

From $384.00

Compare (1)

MIC-S120H New

Hot-dip galvanized (HDG) bracket for heavy-duty fastenings to steel

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025, Baseplate : ASTM A36

From $455.00

Compare (1)

MIC-C-AA/-D

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete using two anchors

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$251.00

Compare (1)

MIC-C-DH New

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to concrete for heavy-duty applications

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $658.00

Compare (1)

MIC-C-UH New

Connector (concrete)

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$247.00

Compare (1)

MIC-CU-MAH New

Hot-dip galvanized (HDG) connector for fastening girders directly to concrete at angles between 0 and 180 degrees

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$333.00

Compare (1)

MIB-CDH New

Hot-dip galvanized (HDG) baseplate for fastening MI girders to concrete

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025

$660.00

Compare (1)

MIC-S

Connector (steel)

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$348.00

Compare (1)

MIC-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI-90 girders to steel for heavy-duty applications

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $514.00

Compare (1)

MIC-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI-120 girders to concrete for heavy-duty applications

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $539.00

Compare (1)

MIB-SH New

Hot-dip galvanized (HDG) baseplate for fastening MI girders to steel

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: HDG: min 55 µm - DIN EN ISO 1461

From $379.00

Compare (1)

MI-DGC

Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $282.00

Compare (1)

MI-SGC M16 New

Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams

Thread - M: M16
Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

$337.00

Compare (1)

AM

Hot-dip galvanized (HDG) threaded rod with 4.8 steel grade used as an accessory for various applications

Thread - M: M12
Material composition: Steel grade 4.8
Surface finish: Hot-dip galvanized

$167.00

Compare (1)

MIC-SC

Hot-dip galvanized (HDG) connector used with MI baseplates that allow for free positioning of the girder

Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
Surface finish: None (primer coating-basic connector)

$113.00

Compare (1)

MIC-E

Hot-dip galvanized (HDG) connector used to connect MI girders longitudinally for long spans in heavy-duty applications

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $352.00

Compare (1)

MIC-UH New

Standard hot-dip galvanized (HDG) connector for fastening MI girders to one another

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $526.00

Compare (1)

MIC-BA /H New

Ultimate hot-dip galvanized (HDG) connectors offering highest versatility within the MI modular system

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $388.00

Compare (1)

MIC-T

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$271.00

Compare (1)

MIC-L

Hot-dip galvanized (HDG) connector for fastening MI girders perpendicularly to one another

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Backing plate, Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Set: Yes

$353.00

Compare (1)

MIC-90-LH New

Connector

Material composition: C30 - DIN EN 10250-2
Surface finish: HDG: 55 µm - DIN EN ISO 1461
Set: Yes

$498.00

Compare (1)

MIC-U-MA

Hot-dip galvanized (HDG) multi-angle connector used with MIC-MAH connectors for fastening MI girders to one another at an angle

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Tooth plate, Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$271.00

Compare (1)

MIC MAH New

Hot-dip galvanized (HDG) multi-angle connector for fastening MI girders to steel beams at an angle

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector min 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $558.00

Compare (1)

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends

Material composition: Moplen EP 240H
Temperature resistance: -30 - 90 °C

From $89.25

Compare (1)

MIC-MI/MQ-X

Hot-dip galvanized (HDG) connector for fastening MQ strut channels parallel to MI girders

Material composition: Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector 55 µm - DIN EN ISO 1461; Bolt, Nut 40 µm - DIN EN ISO 10684
Tightening torque: 37 ft-lbf

$568.00

Compare (1)

MIA-EH

Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Bolt: Steel grade 8.8; Tooth plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $110.00

Compare (1)

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; Spring: 1.4319 AISI 302, 1.4310 DIN EN 10088
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$133.00

Compare (1)

MIA-OH

Hot-dip galvanized (HDG) screw for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Steel grade 8.8
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $64.75

Compare (1)

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

Material composition: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$83.25

Compare (1)

M12-F-SL-WS 3/4"

Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors

Material composition: Steel grade 8
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$181.00

Compare (1)

MIC-PS/MIC-PSP

Hot-dip galvanized (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion

Material composition: U-bolt, Plate: DD11 MOD - HN 547, S235JR - DIN EN 10025; Nut: Steel grade 8
Surface finish: HDG: U-bolt, Nut 45 µm - DIN EN ISO 1461; Plate: 55 µm - DIN EN ISO 1461
Tightening torque: 44 ft-lbf

$271.00

Compare (1)

MIC-TRC

Hot-dip galvanized (HDG) connector for fastening M12 (1/2") and M20 (3/4") threaded rods to MI girders

Material composition: Connector, Square washer: DD11 MOD - HN 547, S235JR - DIN EN 10025; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 51 ft-lbf

From $86.75

Compare (1)

MIC-UB

Hot-dip galvanized (HDG) connector for fastening U-bolts to MI girders

Material composition: Connector, Square washer: DD11 MOD - HN 547, S235JR - DIN EN 10025; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Wrench size: 19 mm

From $211.00

Compare (1)

MIA-BO

Hot-dip galvanized (HDG) U-bolt for fastening pipe shoes to MI girders

Material composition: U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; Nut: Steel grade 8
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $286.00

Compare (1)