Accessories for drill drivers and screwdrivers
Find chucks, belt hooks, gauge checks, and other accessories for your drill drivers and screwdrivers
38 Products
Filter
- Description
- Interchangeable right angle chuck for the SF 8M-22 cordless drill driver
No technical data available
- Description
- Interchangeable universal chuck for the SF 8M-22 cordless drill driver
No technical data available
- Description
- Interchangeable self-tightening chuck for the SF 8M-22 cordless drill driver
No technical data available
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- 13 mm (1/2”) keyless chuck – standard drill chuck for HSS, auger and spade bits, etc.
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Hex bit holder – locking chuck for standard hex bits
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Right-angle drill driver adapter – gives you additional reach when working with limited clearance
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Offset chuck – you can drive screws straight-on with only 10 mm clearance from an adjacent surface
- Description
- Belt hooks and bit holders for cordless drill drivers/screwdrivers or impact drivers/ wrenches on the Nuron battery platform
- For use with
- SD 5000-22, SF 4-22, SF 4H-22, SF 6-22, SF 6H-22, SID 6-22, SIW 6-22, SIW 8-22
- Description
- Belt hooks and bit holders for cordless drill drivers/screwdrivers or impact drivers/ wrenches on the Nuron battery platform
No technical data available
- Description
- Drills, impact drivers and impact wrench accessories
- Product information
- Fits on all cordless drill drivers and impact tools with a sliding battery
- Description
- Drills, impact drivers and impact wrench accessories
- Product information
- Replacement hook wrench for SF 8M-A22. Used in case self tightening chuck cannot be opened by hand.
- Description
- Drills, impact drivers and impact wrench accessories
No technical data available
- Description
- Magazine adapter for collated screws from 1-2 inch long – for interior finishing applications
- Length
- 2.6 in
- Screw length - min
- 0.98 in
- Material composition
- Plastic
- Description
- Extension tube for drywall screwdrivers
- Length
- 21.7 in
- Weight
- 1.9 lb
- Description
- Depth gauge for use with drywall screwdrivers for a precise adjustment of setting depth
- Length
- 2 in
- Weight
- 0.1 lb
- Description
- Depth gauge for use with drywall screwdrivers for a precise adjustment of setting depth
- Length
- 3 in
- Weight
- 0.1 lb
- Description
- Depth gauge for use with drywall screwdrivers for a precise adjustment of setting depth
- Length
- 2 in
- Weight
- 0.1 lb
- Description
- Collated screw magazine for steel framing and decking applications and for use with SF-M3 collated screws and S-SY SF-M3 screwdriver bits
- Length
- 5.8 in
- Screw length - min
- 0.43 in
- Screw length - max
- 0.98 in
- Description
- Collated screw magazine for steel framing and decking applications and for use with SF-M3 collated screws and S-SY SF-M3 screwdriver bits
- Weight
- 0.1 lb
- Description
- Collated screw magazine for steel framing and decking applications and for use with SF-M3 collated screws and S-SY SF-M3 screwdriver bits
- Weight
- 0.2 lb
- Description
- Collated screw magazine for steel framing and decking applications and for use with SF-M3 collated screws and S-SY SF-M3 screwdriver bits
- Weight
- 0 lb
- Description
- Collated screw magazine for steel framing and decking applications and for use with SF-M3 collated screws and S-SY SF-M3 screwdriver bits
- Weight
- 0 lb
- Description
- Pole tools for extending the reach of manual and electric screwdrivers
- Length
- 144 in
- Description
- Pole tools for extending the reach of manual and electric screwdrivers
- Length
- 288 in
- Description
- Screw guide for the ST 1800 screw driver – for fastening sandwich panel screws
- Length
- 5.3 in
- Screw diameter d
- 0.22 in
- Screw length - min
- 2.17 in
- Description
- Screw guide for the ST 1800 screw driver – for fastening sandwich panel screws
- Length
- 5.3 in
- Screw diameter d
- 0.26 in
- Screw length - min
- 2.17 in
- Description
- Speed kit for use with the SDT stand-up handle and SD 5000/4500(-A) screwdrivers for high-speed sidelap fastening
- Screw diameter d
- 0.19 in
- Description
- Speed kit for use with the SDT stand-up handle and SD 5000/4500(-A) screwdrivers for high-speed sidelap fastening
- Screw diameter d
- 0.19 in
- Description
- Screw magazine for collated screws from 1" to 1-1/4" long – for interior finishing applications
- Length
- 6 in
- Magazine capacity
- 40
- Screw length - min
- 0.98 in
- Description
- Screw magazine for collated screws from 1" to 2" long – for interior finishing applications
- Length
- 7.6 in
- Magazine capacity
- 40
- Screw length - min
- 0.98 in
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- Magazine capacity
- 25
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- For use with
- SDT 9
- Magazine capacity
- 25
- Screw length - min
- 0.75 in
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- For use with
- SDT 9
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- For use with
- SDT 9
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Weight
- 0.4 lb
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in
- Weight
- 0.4 lb
- Description
- High-performance stand-up handle for use with collated decking screws for sidelap and frame fastening
- Screw length - min
- 0.75 in
- Screw length - max
- 1.57 in