Home
Products
Modular Support Systems
Piping
Heavy-duty channel system (MIQ)

Heavy-duty channel system (MIQ)

Heavy-duty channel system with integrated MQ profile for easier pipe connectivity

Use Typical Supports Selector for Piping, HVAC and Cable Tray applications

All prices discounted net

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

MIQ New

Girder

Height: 3.5 in
Material composition: S235JR – DIN EN 10025-2
Surface finish: Hot-dip galvanized, 65µm – DIN EN ISO 1461

From $548.00

Compare (1)

MIQC-C New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to concrete for heavy-duty applications

Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $127.00

Compare (1)

MIQB-S New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel

Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461

From $201.00

Compare (1)

MIQC-S New

Hot-dip galvanized (HDG) baseplate for fastening MIQ girders to steel for heavy-duty applications

Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461

From $279.00

Compare (1)

MI-DGC

Hot-dip galvanized (HDG) double beam clamp for connecting MI girders to steel beams for heavy-duty applications

Material composition: Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt 48 µm - DIN EN ISO 10684; Nut 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $282.00

Compare (1)

MIQC-L New

Hot-dip galvanized (HDG) medium-duty connectors to connect two MIQ girders

Material composition: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$326.00

Compare (1)

MIQC-H New

Hot-dip galvanized (HDG) heavy-duty connectors to connect two MIQ girders

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
Set: Yes

From $232.00

Compare (1)

MIQC-E New

Hot-dip galvanized (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications

Material composition: S235JR - DIN EN 10025-2
Surface finish: Hot-dip galvanized 55 µm - DIN EN ISO 1461
Set: Yes

$290.00

Compare (1)

MIQA-T New

T-head bolt

Tightening torque: 62 ft-lbs
Material composition: Bolt: grade 8.8 - DIN EN ISO 898, Plastic: PBT
Surface finish: Hot-dip galvanized, 45 µm - ISO 10684

$221.00

Compare (1)

MIQM New

Wing nut

Material composition: Nut: C4C - DIN EN 10263, Plastic: PA 6.6
Surface finish: Hot-dip galvanized, 55 µm - DIN EN ISO 1461

From $193.00

Compare (1)

MIA-BO

Hot-dip galvanized (HDG) U-bolt for fastening pipe shoes to MI girders

Material composition: U-bolt: Steel grade 8.8 - ISO 898-1; Nut: Steel grade 8
Surface finish: HDG: 48 µm - DIN EN ISO 10684
Tightening torque: 62 ft-lbf

From $286.00

Compare (1)

MIC-PS/MIC-PSP

Hot-dip galvanized (HDG) connector for fastening pipe shoes to MI girders for heavy-duty applications with expansion

Material composition: U-bolt: Steel grade 8.8; Plate: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Nut: Steel grade 8
Surface finish: HDG: U-bolt, Nut 45 µm - DIN EN ISO 1461; Plate: 55 µm - DIN EN ISO 1461
Tightening torque: 44 ft-lbf

$271.00

Compare (1)

MIC-UB

Hot-dip galvanized (HDG) connector for fastening U-bolts to MI girders

Material composition: Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Washer: DIN EN ISO 7089; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Wrench size: 19 mm

From $211.00

Compare (1)

MH-RSC New

HDG rigid strut clamp

Material composition: Clamp: Carbon steel – ASTM A1011 CS Type B, Clamping screw: 304 Stainless Steel
Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Width - B: 1-1/4 in

From $157.00

Compare (1)

MIA-EH

Hot-dip galvanized (HDG) screw with an integrated toothed plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Bolt: Steel grade 8.8; Tooth plate: S235 - EN 10025-2
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

From $110.00

Compare (1)

M12-F-SL-WS 3/4"

Hot-dip galvanized (HDG) hexagon nut with self-locking mechanism used with all MI connectors

Material composition: Steel grade 8
Surface finish: HDG: 45 µm - DIN EN ISO 1461
Tightening torque: 62 ft-lbf

$181.00

Compare (1)

MIA-TP

Hot-dip galvanized (HDG) tooth plate used with the MIA-OH bolt for fastening of MI and MIQ connectors

Material composition: S235 - EN 10025-2
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$83.25

Compare (1)

MIA-EH-P

Hot-dip galvanized (HDG) plate for easier fastening and one-handed adjustment of MI and MIQ connectors

Material composition: Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Spring: EN 10270-3
Surface finish: HDG: 45 µm - DIN EN ISO 1461

$133.00

Compare (1)

MIA-EC

Girder end cap for safer and neater covering of MI and MIQ girder ends

Material composition: Moplen EP 240H
Temperature resistance: -30 - 90 °C

From $89.25

Compare (1)

HDG grade 8 hexagon nut DIN 934 New

Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934

Thread - M: M16
Material composition: Steel grade 8
Surface finish: Hot-dip galvanized - DIN EN ISO 10684

$18.25

Compare (1)

MIC-TRC

Hot-dip galvanized (HDG) connector for fastening M12 (1/2") and M20 (3/4") threaded rods to MI girders

Material composition: Connector, Square washer: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
Surface finish: HDG: Connector, Square washer 55 µm - DIN EN ISO 1461; Bolt, Nut 45 µm - DIN EN ISO 1461
Tightening torque: 51 ft-lbf

From $86.75

Compare (1)

Typical Supports Selector

Use Typical Supports Selector for Piping, HVAC and Cable Tray applications

Back to products ()

Compare

Products ()

Added to cart

Go to shopping cart

Update of quantity

Please note, the order volume has been updated. This is due to package and minimum order quantities.

Please note, the order volume has been updated to . This is due to package and minimum order quantities.

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti Canada
Service Hotline: (800) 363-4458