CUT DEEPER
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
Concrete saws
Built for the tough cuts
CUT TO SIZE
Masonry
Make cleaner, faster cuts on bricks and block using our DSH 600-22 or DSH 700-22 battery cut-off saws.
CUT WITH POWER
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
CUT SAFER
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
CUT DEEPER
Concrete
Make cuts up to 150 mm in concrete with a 360 mm blade using a DSH 900-22 battery cut-off saw.
CUT TO SIZE
Masonry
Make cleaner, faster cuts on bricks and block using our DSH 600-22 or DSH 700-22 battery cut-off saws.
CUT WITH POWER
Asphalt
Get up to 20% more power with new model DSH 700-22 battery cut-off saw.
CUT SAFER
Metal
For safer cuts, use our extra long-lasting SPX metal cutting disc.
Designed for productivity and safety
Increased drop and kickback protection
Unique 3D Active Torque Control (ATC) for battery saws stops tool in ≤ 1 second
Fast-acting blade brake
Blade stops spinning in < 4 seconds after the triggers released.
Virtually dust-free drilling
The DWP 15-22 water pump helps suppress dust to within allowable limits – ideal for battery saws.
Total system performance
Get up to 30% more runtime using our battery-optimized blades.
Save over one ton in CO2 emissions per year with the battery-powered DSH 600-22 ¹
BATTERY OR GAS?
Pick your power source
No matter what your cutting job, we have the heavy-duty performance and power you need. Choose battery cut-off saws on the Nuron platform for both indoor and outdoor work when you’re cutting the equivalent of 1–2 gas tanks a day. Go with gas saws when you’re using two or more gas tanks a day in locations where you don’t have access to power and can’t plug in your chargers.
BATTERY
What you can do with 4 charged batteries*
Up to
22
.
Up to
95
.
Gas
When to use gas
2 or more gas tanks / day
When you need continuous power
* *Based on internal testing with:
DSH 600-22 ATC and DSH 700-22 ATC battery-powered cut-off saws. Figures based on 2x B 22-290 batteries and SPX Universal A blade. Actual output varies based on jobsite conditions.
“No fuel mix issues. No broken pull cords. Plus the longer tool life. Going with battery cut-off saws was an easy choice. ”
Power up your tool crib
FAQs
20 Year Limited Warranty²
Defects in Material and Workmanship
Hilti will repair or replace parts that break as a result of defects in material or workmanship for 20 years.
2 Year Wear and Tear Coverage³
No cost coverage
Hilti will repair tools at no cost for 2 years from the date of purchase. Damage due to normal wear and tear is covered, including parts, labor, and shipping.
1 Day Repair Turnaround⁴
In and out of the repair center in one day, guaranteed, or the repair is free.
If Hilti does not repair a tool the same day it is received in a Tool Service Center then the repair is free - including parts, labor and shipping.
Our SPX-A and SP-A blades are engineered for battery cut-off saws. With these blades you get:
Up to 30% more cuts per charge: Thanks to a thinner blade core and smart diamond segment design.
Smoother cuts: Low-friction diamond segments for a smoother experience.
Faster cuts: Carefully selected diamonds and specific powders make cutting quicker.
Versatile: Diamond segment shapes optimized for almost any application.
Easy blade ID: Blades named ‘A’ and featuring battery icons are made for battery cut-off saws
Use the right blade
Get up to 30% more cuts per charge with our SPX Universal A diamond and SP Universal A diamond blades. Working with metal? Use the SPX metal cutting disc.
Use good cutting technique
For better performance and more work per charge, move the tool back and forth with just enough pressure.
Use water during cutting
Wet cutting helps reduce friction when cutting and can give you more work per charge. Plus it helps reduce exposure to harmful dust like silica.
Use the right battery and charger
Use B 22-290 batteries and a C8 charger with our cut-off saws.
We recommend using two sets of two B 22-290 Nuron batteries to operate your tool. Use our C8 charger for fastest charging.
The tool body of our battery cut-off saws has a similar price to the tool body of our gas cut-off saws. However, when you factor in ongoing fuel costs, gas saws will become more expensive over time in the majority of cases. Battery cut-off saws also have fewer wearable parts than gas cut-off saws. As a result, battery cut-off saws can have up to double the tool life of gas cut-off saws.
Terms and Conditions
(1)This 20-2-1 Warranty modifies only the “WARRANTY” provision of Hilti’s General Terms & Conditions of Sale for Hilti-brand tools, replacing the standard 12-month product warranty. All other Terms and Conditions, including the service warranty, exclusions, disclaimers of implied warranties, and limitations of liability, remain unchanged. This is a professional warranty for tools sold for commercial and professional use and does not create additional consumer rights. Coverage applies only to Hilti-branded tool bodies and excludes batteries, chargers, components, accessories, and consumables. Customers’ statutory warranty rights remain unaffected.
(2) Exclusions apply. Products excluded from the 20-year coverage are covered only under the warranty stated in the General Terms and Conditions of Sale. Excluded products include: [grinders, SD screwdrivers, gas saws, WSR corded tools, UD/UH tools, certain hydraulic and powder actuated components, batteries, and combo kit accessories].
(3) Wear and tear coverage excludes damage due to abuse or use outside the operator’s manual. The following consumable items are excluded and are the customer’s responsibility: pistons, buffers, and spring clips for powder-actuated tools; pull-cord assemblies and filters for gas saws; filters for vacuums; and hydraulic jaws, blades, and dies for hydraulic tools. Fully excluded from wear and tear coverage: grinders, SD 4500, SD 2500, gas saws, WSR corded tools, and UD and UH tools. Covered for one (1) year only: DX 860 and DX 9. Covered for two (2) years or 200 hours of usage, whichever comes first: wall saw head, remote control, E-box, and wire saw power unit and control box.
(4) The one-day repair turnaround begins when the tool is received at a Hilti Tool Service Center (TSC). Eligibility requires pre-approval of the Repair Cost Limit (RCL); repairs authorized below the RCL or requiring a quotation are not eligible. The program is limited to five tools per company per day per TSC and applies only to tools received through Hilti-approved carriers. Delays in payment authorization or force majeure events void the guarantee. Excluded products include total stations, optical devices, detection tools, wall saws, wire saws, and HAT 28. Out-of-warranty tools qualify only with RCL pre-approval. The one-day-or-free program may be discontinued at any time. If Hilti does not meet the turnaround requirement, the customer’s exclusive remedy is a free repair, including parts, labor, and shipping. Hilti is not liable for damages or losses caused by late delivery.
Get your cut-off saw