Check out our new Nuron Heavy-Duty tools
Unique 3D Active Torque Control (ATC) for battery saws stops tool in ≤ 1 second
Blade stops spinning in < 4 seconds after the triggers released.
The DWP 15-22 water pump helps suppress dust to within allowable limits – ideal for battery saws.
Get up to 30% more runtime using our battery-optimized blades.
No matter the job, you’ve got the power to match it. Choose Nuron battery cut‑off saws for indoor or outdoor cutting, with performance equivalent to 1–2 tanks of gas. When the work demands nonstop cutting or you’re burning through 2+ tanks daily, gas is still the right call.
* Based on internal testing with:
DSH 900-22 ATC battery-powered cut-off saw. Figures shown are based on using 2x2 B 22-290 Nuron batteries and 14 inch SPX Universal A blade. Jobsite conditions, such as temperature, humidity, dust levels, and materials being worked on, can significantly affect the maximum amount of work possible with one battery charge.
Hilti will repair or replace parts that break as a result of defects in material or workmanship for 20 years.
Hilti will repair tools at no cost for 2 years from the date of purchase. Damage due to normal wear and tear is covered, including parts, labor, and shipping.
If Hilti does not repair a tool the same day it is received in a Tool Service Center then the repair is free - including parts, labor and shipping.
Up to 30% more cuts per charge: Thanks to a thinner blade core and smart diamond segment design.
Smoother cuts: Low-friction diamond segments for a smoother experience.
Faster cuts: Carefully selected diamonds and specific powders make cutting quicker.
Versatile: Diamond segment shapes optimized for almost any application.
Easy blade ID: Blades named ‘A’ and featuring battery icons are made for battery cut-off saws
Get up to 30% more cuts per charge with our SPX Universal A diamond and SP Universal A diamond blades. Working with metal? Use the SPX metal cutting disc.
For better performance and more work per charge, move the tool back and forth with pressure.
Wet cutting helps reduce friction when cutting and can give you more work per charge. Plus it helps reduce exposure to harmful dust like silica.
Use B 22-290 batteries and a C8 charger with our cut-off saws.
We recommend using two sets of two B 22-290 Nuron batteries to operate your tool. Use our C8 charger for fastest charging.
The tool body of our battery cut-off saws has a similar price to the tool body of our gas cut-off saws. However, when you factor in ongoing fuel costs, gas saws will become more expensive over time in the majority of cases. Battery cut-off saws also have fewer wearable parts than gas cut-off saws. As a result, battery cut-off saws can have up to double the tool life of gas cut-off saws.
(1)This 20-2-1 Warranty modifies only the “WARRANTY” provision of Hilti’s General Terms & Conditions of Sale for Hilti-brand tools, replacing the standard 12-month product warranty. All other Terms and Conditions, including the service warranty, exclusions, disclaimers of implied warranties, and limitations of liability, remain unchanged. This is a professional warranty for tools sold for commercial and professional use and does not create additional consumer rights. Coverage applies only to Hilti-branded tool bodies and excludes batteries, chargers, components, accessories, and consumables. Customers’ statutory warranty rights remain unaffected.
(2) Exclusions apply. Products excluded from the 20-year coverage are covered only under the warranty stated in the General Terms and Conditions of Sale. Excluded products include: [grinders, SD screwdrivers, gas saws, WSR corded tools, UD/UH tools, certain hydraulic and powder actuated components, batteries, and combo kit accessories].
(3) Wear and tear coverage excludes damage due to abuse or use outside the operator’s manual. The following consumable items are excluded and are the customer’s responsibility: pistons, buffers, and spring clips for powder-actuated tools; pull-cord assemblies and filters for gas saws; filters for vacuums; and hydraulic jaws, blades, and dies for hydraulic tools. Fully excluded from wear and tear coverage: grinders, SD 4500, SD 2500, gas saws, WSR corded tools, and UD and UH tools. Covered for one (1) year only: DX 860 and DX 9. Covered for two (2) years or 200 hours of usage, whichever comes first: wall saw head, remote control, E-box, and wire saw power unit and control box.
(4) The one-day repair turnaround begins when the tool is received at a Hilti Tool Service Center (TSC). Eligibility requires pre-approval of the Repair Cost Limit (RCL); repairs authorized below the RCL or requiring a quotation are not eligible. The program is limited to five tools per company per day per TSC and applies only to tools received through Hilti-approved carriers. Delays in payment authorization or force majeure events void the guarantee. Excluded products include total stations, optical devices, detection tools, wall saws, wire saws, and HAT 28. Out-of-warranty tools qualify only with RCL pre-approval. The one-day-or-free program may be discontinued at any time. If Hilti does not meet the turnaround requirement, the customer’s exclusive remedy is a free repair, including parts, labor, and shipping. Hilti is not liable for damages or losses caused by late delivery.
